Blog

Notes on counts, links and the studies that need them.

  1. Field notes: the week a bridge detour tripled a two-lane collector's volume overnight

    What happens to a quiet two-lane collector when a bridge closure dumps arterial traffic onto it, and why you can't just wait for the tube count.

  2. What is critical lane volume, and where does it fit in a signal timing study

    Critical lane volume, the sum of critical volumes method, and how those numbers carry into lead-lag phasing decisions at a signalized intersection.

  3. Converting a one-day vehicle count into a signal warrant study

    How a single day's volume data maps to MUTCD signal warrants, which warrants it can support, and where it falls short.

  4. Design hour volume vs. AADT, and why the gap matters for capacity work

    DHV and AADT measure different things. Here's what design hour volume is, how the 30th highest hour works, and why it drives capacity sizing.

  5. Field notes: the collector road no count program had touched since the last census

    A field-notes look at the collector roads traffic counting programs skip, and what engineers do when the last real number is a decade old.

  6. Seasonal factor groups: why they make or break an annualized count

    What a seasonal factor group is, how DOTs build the factors, and why skipping them wrecks an annualized AADT from a short-duration count.

  7. Turning a directional vehicle count into Synchro volume inputs

    A directional corridor count isn't a Synchro input yet. Here's how to split it into movement volumes and enter it for a signal timing study.

  8. Gap study vs. volume count: what each one actually measures

    Gap studies and volume counts answer different questions at an unsignalized intersection. Here's what separates them, and where HCM gap acceptance fits in.

  9. How to pick a representative count day for a capacity study

    How to pick a count day that won't skew a capacity study: school calendars, holiday timing, and the Tuesday-Thursday default explained.

  10. What is level of service in a traffic capacity study?

    A plain explainer on LOS grades (A-F), how HCM capacity analysis scores a link or intersection, and the data it needs to run.

  11. How to calculate AADT from a short-duration traffic count

    How to turn a 24- or 48-hour count into an AADT estimate using day-of-week, seasonal, and axle correction factors, and where factoring falls apart.

  12. PHF vs K-factor explained: the two peaking numbers teams keep mixing up

    PHF and K-factor both describe peaking, but they answer different questions in a capacity study. Here's where each one belongs.

  13. Tube counts vs. radar counters: which one fits your link?

    A field comparison of pneumatic tube counts and radar vehicle detectors for traffic engineers sizing a capacity or signal-timing study.

  14. What is a turning movement count? TMC basics for capacity work

    A plain explanation of turning movement counts, how TMC studies are collected, and when you need one versus a simple directional link count.

Start a pilotBack to Vehicle Counting